Oscar Iso-Mount Type1 System

The Iso-Mount Type1 achieved over a 90 minute rating for fire resistance using two layers of 15mm Fireline plasterboard and 100mm Rockwool insulation.

View BRE fire test report >

Typical loading calculation for 220mm (8.66 inch)* joist (kg)

2 x layers of 12.5mm standard plasterboard at 10kg each/sq mtr – 20kg

100mm of acoustic thermal cavity fill at 60kg/cu.mtr – 12kg

C stud channel (GL1 or equivalent) – 1.2kg
Note: We do not make or supply GL1 gypliner steel channel. You can save money by purchasing this direct from other online suppliers from £0.88 per metre.

3 x Iso Mount saddles at 37grams each – 0.0111kg

(6.82 lbs/sq.ft)* – round up (total) 33.3kg/sq.metre

3 Iso-Mounts/m2 evenly spread has a max loading of 54kg/m2

Plus: The weight of down lighters, smoke sensors, grills etc that are to be fixed to the plasterboard. Consult the manufacturers of the plaster board for fixtures to be fixed directly to the plasterboard. Use fastenings as recommended by the plasterboard manufacturer.
The maximum safe loading on each mount is 18kg (39.7lbs)*, under this maximum safe load there is up to 2mm (0.08 inches)*, deflection as the mount flexes and the rubber compresses.

Arranging the Iso-mounts evenly spaced at 3 per square metre gives a maximum safe loading of 54kg/sq mtr (11lb/sq.ft)*.

See typical loading calculation above.

Order before 12pm Monday-Friday for next working day delivery.*

*Next day delivery is subject to having no courier issues. Some remote areas of the UK can take longer. Delivery prices apply to mainland United Kingdom only.

Please contact us before purchasing online to receive a quote for delivery costs and times outside of mainland United Kingdom. Our offices are closed over the weekends & bank holidays.

Oscar Iso-Mount Type1 is an isolating acoustic ceiling hanger for timber joist ceilings which significantly reduces transmission of noise from the floor above with minimum ceiling height loss (as little as 5mm). All work is carried out from the room below with no disruption caused to the floor above.

The Iso-Mount Type1 is a three component assembly; the metal ‘L’ bracket screws to the sides of the joists, a rubber block sits in position on the ‘L’ bracket and breaks the path of vibration to the 3rd component, a metal saddle that is held in position on the rubber block.

Typically, we recommend 3 x mounts per square metre to give a max loading of 54Kg/sq.mtr which is adequate for most installations. Then add 15% to allow for inefficient spacing due to the fixed joist positions.

£4.99 £4.99 ex. VAT / £5.99 inc. VAT

Quantity
Price
<100
£4.99
100 - 499
£4.49 10%
500 - 999
£4.24 15%
1000 - 1999
£3.99 20%
2000 - 2999
£3.74 25%
3000+
£3.74 Please contact us to discuss further discounts
× Oscar Iso-Mount Type1 System

The Iso-Mount Type1 achieved over a 90 minute rating for fire resistance using two layers of 15mm Fireline plasterboard and 100mm Rockwool insulation.

View BRE fire test report >

Typical loading calculation for 220mm (8.66 inch)* joist (kg)

2 x layers of 12.5mm standard plasterboard at 10kg each/sq mtr – 20kg

100mm of acoustic thermal cavity fill at 60kg/cu.mtr – 12kg

C stud channel (GL1 or equivalent) – 1.2kg
Note: We do not make or supply GL1 gypliner steel channel. You can save money by purchasing this direct from other online suppliers from £0.88 per metre.

3 x Iso Mount saddles at 37grams each – 0.0111kg

(6.82 lbs/sq.ft)* – round up (total) 33.3kg/sq.metre

3 Iso-Mounts/m2 evenly spread has a max loading of 54kg/m2

Plus: The weight of down lighters, smoke sensors, grills etc that are to be fixed to the plasterboard. Consult the manufacturers of the plaster board for fixtures to be fixed directly to the plasterboard. Use fastenings as recommended by the plasterboard manufacturer.
The maximum safe loading on each mount is 18kg (39.7lbs)*, under this maximum safe load there is up to 2mm (0.08 inches)*, deflection as the mount flexes and the rubber compresses.

Arranging the Iso-mounts evenly spaced at 3 per square metre gives a maximum safe loading of 54kg/sq mtr (11lb/sq.ft)*.

See typical loading calculation above.

Order before 12pm Monday-Friday for next working day delivery.*

*Next day delivery is subject to having no courier issues. Some remote areas of the UK can take longer. Delivery prices apply to mainland United Kingdom only.

Please contact us before purchasing online to receive a quote for delivery costs and times outside of mainland United Kingdom. Our offices are closed over the weekends & bank holidays.

what our customers say

Quote Icon

“Once again thank you for your prompt response with processing our order for the additional Iso-Mounts. The owners took us by surprise when they asked for the additional area to be done, but they have been so impressed with the results of all the acoustic ceilings that they felt they just had to have it done.”

Derrick Murphy, D&M Murphy Plastering Contractors – Oscar Iso-Mount Type 1 Soundproof Ceiling

“The whole transaction has been simple and easy. I fitted the ceiling this weekend and it’s made an instant difference. So much so, that I had to ask the owner of the flat above if he had been using the room above.

I will recommend the product to my friends and will use it on other ceilings in my flat. Keep up the good work.”

Jim Hood, Home DIY installer, Oscar Iso-Mount Type 1 Soundproof Ceiling

“I did not fully appreciate at the time, but the use of Iso-Mount with industry standard metal channel was a huge bonus and cost saver. Also, we did not appreciate how much time and money we saved using the adjustable Iso-Mounts to level the uneven joists. Now installed the ceiling is superb and flat as a pancake. In terms of acoustic isolation the system is superb and overall I couldn’t be more pleased with the end result. The Iso-Mount system is a brilliant way to isolate noise between floors. I recommend it very highly.”

Richard Bowler – Oscar Iso-Mount Type 1 Soundproofing Basement Flat

find out more about our Iso-Mount Acoustic Hangers

get in touch with us

Trust the acoustic specialists at Oscar Acoustics to help you find the right solution for your next project.